Piston control valve PCV-5
In correspondence with low to high viscosity liquid materials, we are belonging to case back system.
- Piston control valve corresponding to wide liquid materials of low middle to high viscosity.
- We are equipped with piston stroke adjusting mechanism, case back mechanism for dripping prevention.
- 1 port type /PCV-5-1P where conversion from syringe method is easily is line-up.
Specifications
| Model | PCV-5-2P | PCV-5-1P | |
| Driving system | Pneumatic driven system | ||
| Minimum dispensing amount | 52 µL | 53 µL | |
| Compatible viscosity | Up to 100 Pa·s | ||
| Applicable fluid materials | Any viscosity fluid | ||
| Control air supply pressure range | 0.3 to 0.7 MPa | ||
| Fluid material supply pressure range | MAX. 0.7 MPa | ||
| Maximum number of cycles | 570 times/min. | 460 times/min. | |
| Connector dia. | Fluid intake port | Rc1/8 (fluid feed joint ordered separately) | |
| Fluid dispensing port | Luer lock | ||
| Control air | One-touch joint for φ6 outer diameter tube (with speed controller) | ||
| Operating temperature range | 5 to 60°C | ||
| Wetted part material | Stainless steel, Fluorine resin, Brass | ||
| Weight | 350 g | 400 g | |
External dimensions
Measurement unit (mm)
