Needle control valve NCV-7DV
Suitable for anaerobic materials
- Since the wetted part is made of fluorine
resin, this valve is suitable for dispensing
fixed doses of anaerobic fluid materials. - A needle control valve that can dispense
fixed doses of fluids containing fillers.
Specifications
| Model | NCV-7DV-2P | |
| Driving system | Pneumatic driven system | |
| Minimum dispensing amount | 8 µL | |
| Compatible viscosity | Up to 10 Pa·s | |
| Applicable fluid materials | Anaerobic material, materials containing fillers | |
| Control air supply pressure range | 0.3 to 0.4 MPa | |
| Fluid material supply pressure range | MAX. 0.7 MPa | |
| Maximum number of cycles | 650 times/min. | |
| Connector dia. | Fluid intake port | φ6 x φ4 fluid feed fitting |
| Fluid dispensing port | Luer lock | |
| Control air | One-touch joint for φ6 outer diameter tube (with speed controller) | |
| Operating temperature range | 5 to 50°C | |
| Wetted part material | Fluorine resin, Fluororubber | |
| Weight | 450 g | |
External dimensions
Measurement unit (mm)
