Needle control valve NCV-17-L
- It supports small amount dispense of liquid materials with UV, filler.
- We reduce bubble mixture.
- Liquid materials invasion to Moving parts is prevented by diaphragm structure.
- It is most suitable for mount the automatic machine at chine type, Compact-size, light weight.
- Liquid flow is large flow rate type of about 3 times.
- Specifications which is available for anaerobic liquid materials is line-up.
|Driving system||Pneumatic driven system|
|Minimum dispensing amount||9 µL|
|Compatible viscosity||Up to 50 Pa·s|
|Control air supply pressure range||0.35 to 0.5 MPa|
|Fluid material supply pressure range||Max. 0.5 Mpa|
|Maximum number of cycles||680 times/min.|
|Connector dia.||Fluid intake port||Rc1/4|
(fluid feed joint ordered separately)
|Fluid dispensing port||Luer lock|
|Control air||One-touch joint for φ4 outer diameter tube (with speed controller)|
|Operating temperature range||5 to 60°C|
|Wetted part material||Stainless steel,|
|PEEK, fluorine resin|
|Weight||222 g||149 g|
Measurement unit (mm)