Hot melt-adaptive non-contact jet Dispenser HM-AeroJet

For curved surface work, it is non-contact seal dispensing

HM-AeroJet-4
  • Nozzle gap control is unnecessary because it is JET dispensing.
  • It is most suitable for process improvement from the double-stick tape joining.
  • Drawing width is kept constant by the synchronized speed function.

Applications

Hot Melt-AeroJet

Smartphone cover adhesion

Hot Melt-AeroJet

Line dispensing on uneven surface

Specifications

Item name Customized AEROJET(applicable to PUR) version 6-A
Model M35-2582
Product configuration
Dispensing head M35-2582-032-00
Temperature control unit M35-2582-033-00-1 or M35-2582-033-00-2
Dispense controller MJET-3-CTR
Customized temperature controller M32-2240-008-00
Dispensing head
Air supply pressure 0.45 to 0.8MPa
Stroke adjustment function Micrometer type
Weight Approx. 0.5kg
Temperature control unit
Mountable container of fluid material 30mL syringe
Weight Approx. 1.5kg
Controller section (MJET-3-CTR)
Control system Electro/pneumatic system
Liquid supply pressure range 0.005 to 0.700MPa
Dispensing time control circuit Digital timer circuit
Dispensing time setting Dot mode 1 to 9999msec.
Line mode Turning on time: 0.01 to 99.99msec.
Turning off time: 0.01 to 99.99msec.
Dispensing frequency setting function 1 to 9999 times (At the LINE mode)
Display section LED digital display
Input/ output signal Input (4-pin metal connector: non-contact or contact signal) (I/O terminal: non-contact) Dispensing signal
Mode switching signal
Output (non-contact output) Dispensing completion signal
In-dispensing signal
Power-on signal
Main mode state signal
Sub mode state signal
Pressure decrease signal
Supply air pressure Max. 0.800MPa
Power supply/power consumption 100 to 240V AC, 50/60Hz, 62W
Weight 4kg
Customized temperature controller for heating
Control system PID control method
Temperature setting range 0 to 180 °C
Temperature adjustment range 30 to 180 °C (when temperature environment is 25 °C)
Rated power source and frequency 100V AC, 50/60Hz
Applicable fuse 250V T2.0A (time-lag fuse ø5 type)
Operating temperature range 15 to 35 °C
Operating humidity range 25 to 75% (non-condensing)
Weight Approx. 1kg
Alarm output Relay contact
Alarm output contact capacity 250V AC 3A, 30V DC 3A